English Home Page Spanish Home Page Chinese Home Page
Grid Casting ToolingTechnical BulletinsCustomer ServicesEmployment OpportunitiesCompany InformationHomeContact UsCasting Accessories & Performance Additives
Wirtz - Grid Casting & Plate MakingOxMaster - Paste Mixing SystemsLeko - Battery AssemblyConBro - Formation & FinishingEagle Oxide - Oxide ProductionBatteryRecycling Systems - Battery Recycling
Select Language

Battery manufacturers depend on the consistent quality and design of their molds. From nuclear submarine batteries to the smallest miner's cap battery, chances are the grids were manufactured from grid molds designed and supplied by the Wirtz Grid Mold Division.

Wirtz Grid Mold has become the industry leader by developing high-speed casting, Wirtz patented the vent bar mold design and the technology of continuous casting tooling. Only Wirtz tooling can give you the most dependable and consistent quality and quantity casting available anywhere in the world today.

Grid Mold Design Request

We are pleased to offer you our design services. To expedite your request it is essential that you complete all of the following sections.

Select a Grid Reference link below to open a new window with a reference drawing to aid you in entering grid dimensions:

Name:
Email Address:
Phone Number:
Fax Number:
Company Name:
Company Address:
 
City:
State:
ZIP or Postal Code:
Country:
Type of machine to be cast on:
(T) Grid thickness: Gate trim frame width:
(W) Grid width: Opposite trim frame width.:
(H) Grid height: Lug (top) frame width:
(F) Foot or tie height: Foot (bottom) frame width.:
No. of feet or ties: No. of small horizontal wires:
(A) Location of 1st foot from grid trim line : No. of large horizontal wires:
(B) Distance from one foot to the next foot : No. of vertical wires:
(C) Foot width: No. of diagonal wires:
Thickness of the tie at the break: Requested Grid weight:
(LW) Lug width: Gate trim only: Yes
No
(LH) Lug height: Trim both gate & opposite frames: Yes
No
(LO) Lug offset from the grid trim line: Alloy antimony: Yes
No
(LT) Lug thickness: Alloy calcium: Yes
No
Grid I.D.:    
Grid I.D. location:    
What type of "corking" procedure do you use:
 
Additional details regarding your project that you wish to include:

Wirtz Grid Mold Machining Center
Wirtz Panel Grid Mold

Wirtz Industrial Grid Mold
Wirtz Industrial Grid Mold

 
Wirtz Grid Mold Certification - The Mark of Excellence

 

 

Return to top of page

Products & Systems (Top of Page)
Company Info | Grid Casting Tooling | Technical Bulletins | Customer Services
Grid Casting Accessories & Performance Additives | Job Opportunities | Contact Us | Home

1105 Twenty-Fourth Street, P.O. Box 5006 Port Huron, MI USA 48061-5006
Phone: 810.987.4700 | Sales: 810.987.7600 | Fax: 810.987.8135 | sales@wirtzusa.com

Site designed & maintained by Wirtz Mfg. Co., Inc.